Our Austin-based crews carry the parts and the know-how to get your air moving again today. Same-day appointments available across Austin and the surrounding zip codes.
Our Austin dispatcher asks a few quick questions to gauge urgency and get you the fastest available window.
Ask as many questions as you want; we'd rather over-explain than leave you unsure.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Austin, AR.
We're not interested in being the cheapest quote on the page — we're the team that shows up in the truck, not a subcontractor we've never met. We carry the credentials Austin inspectors and property managers expect to see, and we keep that documentation available on request for every job, routine or emergency.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Too many homeowners in Austin have a story about a tech who showed up late, quoted one price, and charged another. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Austin is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Austin rooftop unit. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
We cover the full range of heating, cooling, and air quality work Austin properties actually need.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Austin dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
We keep the truck stocked with the parts that fail most often on the equipment common to Austin homes, which is exactly why most repairs don't require a return visit.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Austin homeowners through efficiency ratings and how they translate into real monthly savings before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
Downtime in a commercial space costs money every hour a system is offline. Our commercial division services multi-zone commercial buildouts across Austin, with priority response for facilities that can't afford downtime.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Austin households that want more than just temperature control.
Maintenance plan members in Austin get scheduling reminders automatically, so tune-ups don't fall through the cracks during a busy season.
Guarantees only mean something if a company actually honors them, so here's exactly what ours covers.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
We quote a flat rate before work begins and that number doesn't change once you approve it.
A technician doesn't consider the job done until the system is tested and performing correctly.
A little attention to how your system is running can save you a lot of money and discomfort.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
Weak airflow from the vents often traces back to a clogged filter, a failing blower motor, or leaking ductwork.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
We'll always tell you honestly when a repair is the better call versus when it isn't.
You'll know the cost before a wrench touches your system.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
If something isn't right after we leave, we come back and make it right.
Every technician carries current state licensing and manufacturer training.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
Every review below reflects an actual service call in the Austin area.
"I called three other companies first and this was the only one that actually picked up. The pricing was exactly what they quoted over the phone."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. You can tell these guys actually know what they're doing."
"They handled the whole install in a single day, exactly like they said they would. Followed up a week later just to check everything was still running fine."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Now our go-to for every property in the portfolio."
"I appreciated that they didn't try to sell me a bigger unit than I needed. Installation crew was in and out in a day and left the space cleaner than they found it."
"The tech walked me through what he was checking as he went, which I really appreciated. This is the company I'm saving in my phone now."
Understanding what typically fails helps homeowners know what to watch for and when a repair call is worth making before things get worse.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Whether your Austin home has a traditional split system, a ductless mini-split, a heat pump, or a hybrid dual-fuel setup, our crews are equipped to diagnose and repair it. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Manufacturer-certified across multiple major residential equipment lines.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
Our policy is simple: you approve the number before we touch the system.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
If you're unsure whether your address falls in our service area, a quick call to +1-866-805-8548 will confirm it.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
Ask about financing during your in-home estimate to see what fits your situation.
Most Austin homes benefit from two tune-ups a year — one before cooling season and one before heating season.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Ask about current after-hours rates when you call +1-866-805-8548.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
Housing stock varies a lot across Austin — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
Larger properties get the same upfront pricing and licensed technicians as a single-family service call, just coordinated at scale.
A full system replacement is one of the bigger home expenses most people face, and we don't expect everyone to pay it in a single lump sum. If a rebate or local incentive program applies to your Austin installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Austin and the neighboring communities, keeping response times tight because our trucks stay close to home.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
